xiaoxiao62
Jr Member
Posts: 10
Status: Offline
Joined:
pm
| Customized Cut Out Fuse (8th May 23 at 1:08am UTC)
http://www.zonriinsulators.com/cut-out-fuse/ | | Customized Cut Out Fuse Introduction
fuse cut out 20kV is made of insulating base, live and fixed contact and fuse tube. Fixed contact installed on both sides of insulating base, and live contact installed on both sides of fuse tube , and out Bakelite paper tube or epoxy 鈥揼lass fiber fabric tube . Load-off cutout fuse is used for breaking &making load current with adding spring auxiliary contacts and arc-quenching cover. When cutout fuse under normal working condition . Fuse tube forms close location with help of tight for fuse link.
When any fault come out in system, fault current make fuse link melt promptly , and form arcing , arc-quenching tube heated by arc , decompose lot of gas ,produce great pressure inside of tube, and blow vertically in high strength, the electric arc would be lengthened and quenched quickly. After melting of fuse link, fixed contact below turn down due to lost of tension, it makes locking mechanism to release fuse tube to fall down, it forms obvious breaking off location.
When necessary to pull-off load, unhinge contact with insulating link, live and fixed contacts are still connected , to pull contacts continuous with insulating link , auxiliary switch also would be apart , it make electric arc between auxiliary switches ,arc would be lengthened in narrow slot of arc-quenching cover , which produce gas at same time, to quench the arc when current over zero.
Environmental conditions for use of drop-out fuse
1. The normal operating conditions of the product: the ambient temperature is not higher than +40 degrees and not lower than -40 degrees; the altitude does not exceed 1000m; the maximum wind speed does not exceed 35m/s; the earthquake intensity does not exceed 8 degrees.
2. The product is not suitable for the following places: places with burning or explosion hazards; places with severe vibration or impact; areas with conductive, chemical gas effects and severely polluted salt spray.
Our customers often send us the best-selling products in their country for development and optimization, so that they have more advantages in the competition of projects in their own country.
Our products are strictly screened, tested and inspected from the purchase of materials to delivery to ensure the quality of the products.
The quality of our products is better than other manufacturers because we strictly follow the IEC standard production, and our silicon package thickness does not cut corners.
FAQ
Q:How many kilovolt experiments can your company's laboratory do?
A:Various experiments of 330KV products.
Q: Are your company's production certificates complete?
A: Yes ,we have full certificates.
Q:Is your hot-dip galvanizing coated according to IEC standard?
A:Yes, all our fittings are coated in strict accordance with IEC standards.Customized Cut Out Fuse
website:http://www.zonriinsulators.com/cut-out-fuse/ | |
|
